エスケー化研
セラミソフトスタッコ
Product names, manufacturer names and thinner product names are kept in Japanese so you can match them with the can label at the store or on site.
Basic Information
| Manufacturer | エスケー化研 |
|---|---|
| Use / Type | Use: Exterior Wall ｜ Features: Elastomeric, Stain-resistant Original (JA): 外装合成樹脂エマルション系厚付け仕上塗材（外装厚塗材E）／高耐久・低汚染型弾性スタッコ |
| Water-based / Solvent-based | Water-based, 1-component |
| 1K / 2K | 1-component (1K) |
Application Specifications
| Dilution | Base material application (1) (base coat) / texture spray gun or tile gun, nozzle diameter 6-6.5mm, pressure 392-588kPa (4-6kgf/cm²): 5.0–6.5% Main (texture) coat application (2) (Pattern (texture) layer) /stucco-gun nozzle diameter 8–12 mm pressure 392–588kPa (4–6kgf/㎠) As-sprayed (spray texture) finish: 0–1% Main (texture) coat application (2) (Pattern (texture) layer) /small-grain finish, tile gun nozzle dia. 6.5–8 mm spray pressure 196–294kPa (2–3kgf/㎠): 5.0–6.5% |
|---|---|
| Thinner / Diluent | Base material application (1) (base coat) / texture spray gun or tile gun, nozzle diameter 6-6.5mm, pressure 392-588kPa (4-6kgf/cm²): Tap water For thinning Main (texture) coat application (2) (Pattern (texture) layer) /stucco-gun nozzle diameter 8–12 mm pressure 392–588kPa (4–6kgf/㎠) As-sprayed (spray texture) finish: Tap water For thinning Knockdown / flatten high spots by pressing with a plastic roller dampened with 塗料用シンナーA: 塗料用シンナーA (paint thinner A) (thinningではなく押さえ用途) Main (texture) coat application (2) (Pattern (texture) layer) /small-grain finish, tile gun nozzle dia. 6.5–8 mm spray pressure 196–294kPa (2–3kgf/㎠): Tap water For thinning |
| Number of Coats | 1 coat(s) |
| Coverage (consumption) | Base material application (1) (base coat) / texture spray gun or tile gun, nozzle diameter 6-6.5mm, pressure 392-588kPa (4-6kgf/cm²): 1.3–2.0 kg/m² Main (texture) coat application (2) (Pattern (texture) layer) /stucco-gun nozzle diameter 8–12 mm pressure 392–588kPa (4–6kgf/㎠) As-sprayed (spray texture) finish: 2.0–2.5 kg/m² Main (texture) coat application (2) (Pattern (texture) layer) /small-grain finish, tile gun nozzle dia. 6.5–8 mm spray pressure 196–294kPa (2–3kgf/㎠): 1.0–1.2 kg/m² |
| Recoat Time (drying interval) | 23°C: Main (texture) coat application (1)→between steps 4 or more (hr) 23°C: Main (texture) coat application (2)→final curing 24 or more (hr) (Knockdown (flattening high spots) 0.5 or less) 23°C: Knockdown (flattening high spots)→final curing 24 or more (hr) |
⚠️ Cautions & Notes (Japanese original)
To avoid mistranslation of safety-critical information, the notes below are kept in the original Japanese. Please check them with a translation app, or ask a Japanese-speaking colleague. Always follow the official manufacturer TDS.
⚠️ Please verify before use
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
The values above are reference values based on the manufacturer's official catalogs and technical data sheets (TDS). Specifications may change. Always check the product label and the latest official TDS before actual application.
Data source: official catalogs / technical data sheets (TDS) of エスケー化研
Page updated: 2026-09-27